Product name：Carbon Steel Plate
Grade：Q195、Q215、Q235、Q255、Q275、Q345、Q355、SS400、ST37、ST52、S235JR、a36、s235jr etc.
Standard：JIS,AISI,ASTM,GB,DIN,BS,BV,etc.
Length：50MM ~ 2200MM or as required by customer
Width：0.2mm-3.0mm or as required by customer

Product name：Carbon Steel Plate
Grade：Q195、Q215、Q235、Q255、Q275、Q345、Q355、SS400、ST37、ST52、S235JR、a36、s235jr etc.
Standard：JIS,AISI,ASTM,GB,DIN,BS,BV,etc.
Length：50MM ~ 2200MM or as required by customer
Width：0.2mm-3.0mm or as required by customer

Product name：Carbon Steel Plate
Grade：Q195、Q215、Q235、Q255、Q275、Q345、Q355、SS400、ST37、ST52、S235JR、a36、s235jr etc.
Standard：JIS,AISI,ASTM,GB,DIN,BS,BV,etc.
Length：50MM ~ 2200MM or as required by customer
Width：0.2mm-3.0mm or as required by customer

Product name：Carbon Steel Plate
Grade：Q195、Q215、Q235、Q255、Q275、Q345、Q355、SS400、ST37、ST52、S235JR、a36、s235jr etc.
Standard：JIS,AISI,ASTM,GB,DIN,BS,BV,etc.
Length：50MM ~ 2200MM or as required by customer
Width：0.2mm-3.0mm or as required by customer

Product name：Carbon Steel Plate
Grade：Q195、Q215、Q235、Q255、Q275、Q345、Q355、SS400、ST37、ST52、S235JR、a36、s235jr etc.
Standard：JIS,AISI,ASTM,GB,DIN,BS,BV,etc.
Length：50MM ~ 2200MM or as required by customer
Width：0.2mm-3.0mm or as required by customer

Flat steel refers to steel with a width of 12-300mm, a thickness of 3-60mm, a rectangular cross-section and slightly blunt edges. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked thin plates. Main application: Flat steel can be used as a finished material to make hoop iron, tools and mechanical parts, and it can be used as a structural part of a house frame and an escalator in a building.

Product name：Carbon Steel Coil
Grade：Q195、Q215、Q235、Q255、Q275、Q345、Q355、SS400、ST37、ST52、S235JR、a36、s235jr etc.
Standard：JIS,AISI,ASTM,GB,DIN,BS,BV,etc.
Length：50MM ~ 2200MM or as required by customer
Width：0.2mm-3.0mm or as required by customer

Flat steel refers to steel with a width of 12-300mm, a thickness of 3-60mm, a rectangular cross-section and slightly blunt edges. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked thin plates. Main application: Flat steel can be used as a finished material to make hoop iron, tools and mechanical parts, and it can be used as a structural part of a house frame and an escalator in a building.

It is mainly divided into two types: equilateral angle steel and unequal angle steel. Among them, unequal angle steel can be divided into two types: unequal sides and equal thickness and unequal sides and unequal thickness. The delivery length of angle steel is divided into two types: fixed length and double length. The selection range of fixed length for domestic angle steel has four ranges: 3~9m, 4~12m, 4~19m, and 6-19m according to the different specifications. The length of angle steel produced in Japan ranges from 6m to 15m.

Composite wear-resistant steel plate, the chemical composition of the alloy wear-resistant layer has a carbon content of 4 to 5%, and the chromium content is divided into two levels: 18 to 30% and 30 to 40%. The volume fraction of Cr7C3 carbide in its metallographic structure Reaching more than 50%, the macro hardness is HRC56~62, and the hardness of chromium carbide is HV1400~1800. Since carbides are distributed vertically in the direction of wear, even compared with cast alloys of the same composition and hardness, the wear resistance is more than doubled.

Composite wear-resistant steel plate, the chemical composition of the alloy wear-resistant layer has a carbon content of 4 to 5%, and the chromium content is divided into two levels: 18 to 30% and 30 to 40%. The volume fraction of Cr7C3 carbide in its metallographic structure Reaching more than 50%, the macro hardness is HRC56~62, and the hardness of chromium carbide is HV1400~1800. Since carbides are distributed vertically in the direction of wear, even compared with cast alloys of the same composition and hardness, the wear resistance is more than doubled.

Composite wear-resistant steel plate, the chemical composition of the alloy wear-resistant layer has a carbon content of 4 to 5%, and the chromium content is divided into two levels: 18 to 30% and 30 to 40%. The volume fraction of Cr7C3 carbide in its metallographic structure Reaching more than 50%, the macro hardness is HRC56~62, and the hardness of chromium carbide is HV1400~1800. Since carbides are distributed vertically in the direction of wear, even compared with cast alloys of the same composition and hardness, the wear resistance is more than doubled.